CR40 CRS40 CRSB40 Stud Type Track Roller Cam Follower With Cage Guidance

CR40 CRS40 CRSB40 Stud Type Track Roller Cam Follower With Cage Guidance

Features of Track Rollers

CR40S stud-type track roller bearing with a screwdriver slot and lip seals handles moderate radial and shock loads in cam- and track-type applications. This track roller bearing, also called a cam follower, has a thick-walled outer ring that helps minimize deformation under heavy radial and shock loads.

It has a non-separable, threaded stud-type design for through-hole or threaded mounting, a screwdriver slot on the flange end that helps keep the stud from turning while tightening the mounting nut, and a full complement of needle rollers for a higher radial load-carrying capacity than caged rollers. This track roller is made of bearing steel treated with black oxide for corrosion protection. Its operating temperatures range from -30 to +110 degrees C.

All inch-series stud-type track rollers with a screwdriver slot can be relubricated through the flanged end of the stud. Sizes 12 and larger can also be relubricated through the threaded end of the stud and through a cross-drilled hole in the stud shank. Both stud ends accept a standard nominal inch drive-type grease lubrication fitting (not included).

All Stud-type track rollers come with lubrication fitting plugs for closing off unused holes.

This track roller bearing meets for quality assurance and is suitable for use in a broad range of applications including process transfer lines, ram support rollers, conveyors, machine tools, and indexing equipment, among others.

Dimensions and Capacities of CR Track Rollers

Pictures

CR Stud Type Cam Follower

Outer Ring Stud Type Cam Follower

CR Track Roller Bearing With Stud

CR40 CRS40 CRSB40 Stud Type Track Roller Cam Follower With Cage Guidance Images